04-03-2021

Download Microsoft USB Devices Driver



  1. Download Microsoft Usb Device Driver
  2. Download Microsoft Usb Devices Drivers
  3. Download Microsoft Usb Video Device Driver
  4. Download Microsoft Usb Devices Driver Updater

Alternative spelling: driver for USB storage device driver for windows 98, USB mass storage driver, USB driver, Windows 98: USB Driver, umss-2.1.exe, umss.exe Latest update on January 7, 2021 at 06:15 AM by Elena Keracheva. Once I did, I could access USB drives again. I created a manual restore point and did a full backup to an external drive using Acronis. Once that completed, I did a reboot which worked. However, several hours later, USB drives were not recognized (missing driver) and a reboot failed (inaccessible boot device). I then went about updating every driver in my Device Manager. I uninstalled the Unknown USB Device and then updated other drivers. Certain drivers (such as PCI Express Root Port #3 - 9C14) when updating would also reinstall the Unknown USB Device, which I would then uninstall and keep working down the list. At the end of updating.

Huawei USB Drivers (CDC/ADB/Qualcomm/Kirin/MTK VCOM/USB 1.0) is a very useful program to connect any Huawei Smartphones and Tablets to the computer successfully. Once you have installed, Huawei USB Driver, it creates a bridge that can help to flash/update or upgrade your phone, Also, allows you to browse all Huawei device files like photos, videos, contacts, messages, etc. You can take a backup & can restore your data.

Without installing a USB driver you won’t be able to connect your phone to the computer. That’s why here I share the latest version of Huawei USB driver that you can download from here.

Note: Huawei USB drivers compatible with all versions of Microsoft Windows 7, Windows 8, Windows 10 version (32 & 64bit).

Here we share each and every step which can help you to install every version of the Huawei Honor USB driver to your computer, So, follows the below process to install Huawei CDC/ADB/Qualcomm/Kirin/MTK VCOM/USB 1.0 driver, to your computer.

Read Also: How to Flash Huawei P30 Lite Stock Firmware

Download & Install Huawei USB Drivers:

Huawei Model NameUSB Drivers
Huawei Mate 30 (All)Download
Huawei Mate 20, 20 ProDownload
Huawei mate 20xDownload
Huawei Mate 10 / ProDownload
Huawei P10 LiteDownload
Huawei Mate 8Download
Huawei Mate 9Download
Huawei Mate XDownload
Huawei Mate XsDownload
Huawei P40, P40 ProDownload
Huawei P40 Pro & Pro +Download
Huawei P40 LiteDownload
Huawei P30 LiteDownload
Huawei P Smart ZDownload
Huawei P30, P30 Pro, P30 LiteDownload
Huawei P20, ProDownload
Huawei P20 LiteDownload
Huawei P10/PlusDownload
Huawei P10 LiteDownload
Huawei P Smart + / P Smart ZDownload
Huawei P Smart ZDownload
Huawei Nova 7 & 7 ProDownload
Huawei Nova 7 SEDownload
Huawei Nova 6, Nova 6 5G, Nova 6 SEDownload
Huawei Nova 5i / 5i Pro / 7iDownload
Huawei 7iDownload
Huawei Nova 5 / 5 ProDownload
Huawei Enjoy 10, 10 PlusDownload
Huawei Enjoy 10sDownload
Huawei Enjoy 9 / 9S / 9eDownload
Huawei Y9/ Y9 Prime 2019Download
Huawei Y7 Pro / Y9sDownload
Huawei Y9sDownload
Huawei Magic 2Download
Huawei Mediapad smartphonesDownload
Huawei Universal USB Drivers [Any Huawei Model]Download
Huawei ADB DriverDownload
Huawei CDC DriverDownload

Download Honor USB Drivers for Windows

Honor Model NameUSB Drivers
Honor 30/ 30 ProDownload
Honor 30 Pro+Download
Honor 20, 20 ProDownload
Honor X10Download
Honor 20 LiteDownload
Honor 20iDownload
Honor 10, 10iDownload
Honor 10 LiteDownload
Honor 9,9 LiteDownload
Honor 9iDownload
Honor 9NDownload
Honor V30, V30 ProDownload
Honor V20 / View 20Download
Honor View 10 / V10Download
Honor 9X / 9X Pro / 9X LiteDownload
Honor 8X / 8X Max / 8CDownload
Honor 30sDownload
Honor 20sDownload
Honor Play 9ADownload
Honor Play 4T, 4T ProDownload
Honor Play 3Download
Honor Play 3eDownload
Honor Play 8ADownload
Honor Universal USB Drivers [Any Model]Download
Honor ADB DriverDownload
Honor CDC DriverDownload

Download Microsoft Usb Device Driver

Huawei USB COM 1.0 USB SER USB Driver: Download

How to install Huawei USB Driver

  • Firstly, you need to download the USB Driver on your Computer.
  • Extract the ADB USB Driver using WinRAR or 7zip.
  • Right-click on my computer and then click on manage.
  • Check on the left side there you can see the Device Manager option.

OR

  • Click on the search bar and search Device Manager there.
  • Choose the first result from there.
  • Then click on Action and then click on Add legacy hardware there.
  • After that, click on Next and then choose to Install the hardware that I manually select from the list (Advanced) then click on Next.
  • Now tap on Show all devices, then click on Next & click on Have disk.
  • Click on Browse then choose the Huawei USB driver file you downloaded and extracted and click on the OK button.
  • Then choose the Android USB interface and click on Next.
  • Now the Huawei USB driver installation starts, click on Next, then click on Finish.
Download Microsoft USB Devices Driver

How to Install Huawei ADB Driver:

  • Download the USB Driver first.
  • Then open the device manager in your pc.
  • Then click on Action and choose Add Legacy Hardware and click on Next.
  • Now choose to Install the hardware that I manually select from the list (Advanced) and then click on Next.
  • Then Tap on Show All Devices and click on Next.
  • Now click on Have disk.
  • Select Browse Choose the Huawei ADB USB driver file you downloaded and then click on OK.
  • Then choose the ADB Interface and click on Next.
  • Now the Huawei USB driver installation starts, click on Next, then click on Finish.
  • Then restart your device once if you are still getting an error.

How to Install Huawei Qualcomm USB Driver

  • First, download the USB driver file package on your PC.
Download
  • Then Open the Qualcomm USB Driver Setup File.exe.
  • After that, choose WWAN DHCP is not used to get IPAddress And then Click on Next.
  • Again tap on Next button.
  • Choose I accept the terms in the license agreement and click on Next.
  • Click on Install to start the installation process.
  • Click Finish to successfully install Huawei Qualcomm Driver on your PC.

How to Install Huawei CDC Driver

  • First, open the control panel of your PC.
  • Launch Device Manager from there.
  • Then Click on Action & Choose Add Legacy Hardware and click Next.

Download Microsoft Usb Devices Drivers

  • Choose to install the hardware manually from a list and click Next.
  • Now Choose “Show all devices” and click Next.
  • A window will open up. select the CDC driver folder you downloaded and click Ok.
  • Then click “Next” to start the hardware installation process.
  • Wait until the installation process gets finished.
  • Then you will see the massage of Completing the Add Hardware Wizard. Click on Finish.
  • This is how you can install Huawei CDC Driver on your PC.
Download Microsoft USB Devices Driver

How to Install Huawei VCOM Driver

USB
  • Open the Control Panel and choose the Device Manager option.
  • Then right-click on your username and select Add Legacy hardware.
  • Then click on the Next button.
  • Now select Install the hardware that I manually select from a list (Advanced) and click on the Next button.
  • After that, tap on Show All Devices and click on the Next button.
  • Then click on Have Disk and select .inf file that you already downloaded & click on Next.
  • That’s it, Your Huawei VCOM Driver are successfully installed on your PC.

How to Install Huawei USB COM 1.0 USB SER Driver

First of all, you have to enable test mode on your Windows computer to successfully install the Huawei USB COM 1.0 USB SER Driver, USB COM 1.0 driver mainly help to detect the Huawei Honor phone for flashing and unlocking

  • Search for CMD on your Windows PC
  • Select CMD from the search results
  • Righ-Click on that and select Run As Administrator
  • Copy the Code: bcdedit /set testsigning on
  • Paste it to your CMD and Hit enter
  • Now Restart your Windows Computer.
  • Then You can see the “Test Mode” is enabled on your Windows computer.
  • Now, Install the Huawei USB COM 1.0 USB SER Driver by following the above Huawei CDC Driver installation process on your computer.

If you want to disable the test mode on your windows computer then follow the above process and replace the code with the below-provided code, Restart your PC.

Download Microsoft Usb Video Device Driver

  • bcdedit /set testsigning off

Download Microsoft Usb Devices Driver Updater

Well, If you followed all the above process very carefully, I assure you you will be able to install All Huawei USB drivers (CDC/ADB/Qualcomm/Kirin/MTK VCOM/USB 1.0) on your PC.

If you still stuck or could not understand anything relating to this topic, you can let us know in the comment section below. we will help you as soon as possible. Thanks a lot for visiting.

  • August 22, 2019 2.9.8

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.9.8

    Released

    August 22, 2019

    Type

    ZIP

    Filesize

    3MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 controller
    • Graphics card with 24 or 32 bit
    • Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Added several internal interfaces for particular sensors (J003).
  • January 25, 2019 2.9.6

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.9.6

    Released

    January 25, 2019

    Type

    ZIP

    Filesize

    3MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 controller
    • Graphics card with 24 or 32 bit
    • Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Added missing Tonemapping Auto property.
  • May 4, 2018 2.9.5

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.9.5

    Released

    May 4, 2018

    Type

    ZIP

    Filesize

    3MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 controller
    • Graphics card with 24 or 32 bit
    • Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Enabled tonemapping for 8bit video formats, e.g. Y800, RGB24 and RGB32.
  • November 21, 2017 2.9.4

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.9.4

    Released

    November 21, 2017

    Type

    ZIP

    Filesize

    3.2MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Repaired not working J003 mono sensor pattern fix on particular video formats.
    2. This driver version is the last that works in Windows XP.
  • January 9, 2017 2.9.3

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.9.3

    Released

    January 9, 2017

    Type

    ZIP

    Filesize

    3.2MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Added a pattern fix for J003 mono sensors.
  • January 9, 2017 2.9.1

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.9.1

    Released

    January 9, 2017

    Type

    ZIP

    Filesize

    3.2MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Fixed the driver signature Code 52 error on new Windows 10 v1607 systems.
  • January 15, 2016 2.8.9

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.8.9

    Released

    January 15, 2016

    Type

    ZIP

    Filesize

    2.3MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Changed certificates so that the driver can also be installed in Vista.
  • November 9, 2015 2.8.7

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.8.7

    Released

    November 9, 2015

    Type

    ZIP

    Filesize

    2.3MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Fixed an error which can appear when using sharpness on older CPUs.
  • October 20, 2015 2.8.5

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.8.5

    Released

    October 20, 2015

    Type

    ZIP

    Filesize

    2.3MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Fixed a bug which can appear on LivePause call.
  • July 15, 2015 2.8.0

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.8.0

    Released

    July 15, 2015

    Type

    ZIP

    Filesize

    2.4MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Support of DFK ECU010-L34 with serial number property.
    2. Added tone mapping.
  • February 17, 2015 2.7.33

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.7.33

    Released

    February 17, 2015

    Type

    ZIP

    Filesize

    2.4MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. The Auto Focus Onepush Running flag now resets correctly after the auto focus has finished.
  • February 5, 2015 2.7.32

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.7.32

    Released

    February 5, 2015

    Type

    ZIP

    Filesize

    2.4MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Video format MJPG (2592x1944) of DFK AFU050-L34 camera can now be used.
  • January 14, 2015 2.7.31

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.7.31

    Released

    January 14, 2015

    Type

    ZIP

    Filesize

    2.3MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Support for IMX236 based cameras.
    2. Support for RGB64 color formats.
    3. Several performance improvements.
  • June 6, 2014 2.7.9.1152

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.7.9.1152

    Released

    June 6, 2014

    Type

    ZIP

    Filesize

    2.1MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Added new properties: Brightness, sharpness, de-noise, saturation, hue and contrast.
    2. Added new property: Highlight reduction.
    3. Added new property: White balance temperature controls.
    4. Pixelfix for Y16 cameras now works as expected.
    5. VideoControl_ExternalTrigger (DirectShow property) can now be set as expected.
  • January 1, 2014 2.6.5.1014

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.6.5.1014

    Released

    January 1, 2014

    Type

    ZIP

    Filesize

    1.9MB

    Requirements

    • Intel Pentium IV or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Fixed missing auto-gain for DFK AFU130.
    2. Fixed focus when start value is out of auto_focus_range.
    3. Fixed problem with AUTOFOCUS_ROI_RIGHT: minimum possibly wrong.
    4. Fixed auto focus ROI not working for 21*UC cameras.
    5. Fixed crash on load/connect with certain cameras 22/72xUC.
    6. Fixed previous exposure settings not being loaded on reconnect.
    7. Complete reworking of internal property system.
    8. Fixed Windows XP driver load crash.
    9. Fixed drop counter to be accessible from DirectShow.
    10. Fixed Windows 8 problem with certain video formats needing converters with standard DirectShow filters (e.g. Y800, capturing to an Y800 avi file was not possible).
    11. Fixed a problem with Windows 8 usbxhci driver not allowing transfers larger then 4 MB.
  • February 26, 2013 2.4.14.851

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.4.14.851

    Released

    February 26, 2013

    Type

    ZIP

    Filesize

    1.9MB

    Requirements

    • Intel Pentium IV or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. WHQL certification.